How to Change Ringtone on Android - Quick Step-by-Step Guide > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Open Settings → Sound (or Sound & vibration) → Default ringer and select a built-in option or tap "Select from files" to choose a track from internal storage. If you beloved this write-up and you would like to obtain a lot more data with regards to 1xbet login kindly go to our own web site. For immediate compatibility pick MP3, M4A or WAV files and avoid uncommon codecs.

Device-specific paths: Samsung – Settings → Sounds and vibration → Incoming call sound; Pixel – Settings → Sound → Default call sound; OnePlus – Settings → Sounds & vibration → Phone sound. If the expected option is not visible search Settings for "sound" or use the Files app to open an audio file and choose "Set as" when that option appears.

File recommendations: use 44.1 kHz sample rate and 128–256 kbps bitrate, keep the clip under 30 seconds and under 3 MB for fastest loading and widest support. If a new track doesn’t appear, copy the file into internal storage (store in a system sounds folder or a general media folder), then restart the phone or force-stop the Settings app to refresh the list.

Assign per contact: open the Contacts app, select a contact, tap Edit → More (or the three dots) → choose a custom call sound option and pick the file. For apps that offer downloaded tones (for example, Zedge), review permissions and avoid ad-heavy installers; prefer exporting the audio file to internal storage and assigning it from Settings for more control.

If you want to revert quickly, keep a small folder with preferred tracks in internal storage and label files clearly (e.g., "Work_CallTone.mp3"). When troubleshooting, check file format, file size, and whether any audio app holds exclusive access; converting problematic files to standard MP3 at 128 kbps usually resolves recognition issues.

Prepare your ringtone file

Use an MP3 or OGG file no longer than 30 seconds; trim silence, apply a 1–2 s fade-out, and normalize peaks to about -1 dBFS.

• 
  
• Accepted formats: MP3, M4A (AAC), WAV, OGG – MP3/OGG are most compatible with a wide range of phones.
  
• Sample rate and bitrate: 44.1 kHz; MP3 bitrate 128–192 kbps; WAV at 16-bit PCM if lossless is needed.
  
• Channels: mono is sufficient for short alerts and reduces size; choose stereo only for stereo-specific content.
  
• Duration guidelines: keep call tones ≤30 s; notification/alert tones ≤5 s for immediate recognition.
  
• Loudness target: peak ≤ -1 dBFS; approximate integrated loudness -10 to -8 LUFS for clear audibility without clipping.
  
• Filename rules: use lowercase ASCII, replace spaces with underscores, avoid special characters; example: wake_up_01.mp3
  
• Metadata: strip embedded artwork and excessive tags to prevent odd displays in sound pickers.
  

1. 
   
2. Edit with a simple editor (Audacity, WaveEditor, or an online cutter): trim start/end, set fade-out, export using the settings above.
   
3. If using command line, example with ffmpeg to trim to 30 s, fade-out 2 s and set sample rate/bitrate:
   

   ffmpeg -i input.mp3 -t 30 -af "afade=t=out:st=28:d=2,volume=-1dB" -ar 44100 -b:a 192k output.mp3

   
   
   
4. Convert to MP3 128 kbps if a device does not show the file in sound selection menus.
   
5. Copy the file to the device’s tones directory (create a folder named Ringtones or Notifications on internal storage if it doesn’t exist) using USB or a file manager app.
   
6. Force a media rescan by rebooting or using a media-scan utility so the system indexes the new file.
   
7. Test selection from the phone’s sound settings; if the file is missing, re-export with the recommended settings above and retry copying.
   

Legal note: avoid uploading full commercial tracks without permission; prefer short clips you own or royalty-free sources to prevent copyright issues.

Check supported audio formats (MP3, M4A, WAV)

Use MP3, M4A (AAC) or WAV; set sample rate to 44.1 kHz (48 kHz accepted) and choose 128–192 kbps for compressed files or 16-bit PCM for uncompressed WAV.

MP3 – container/codec: MPEG-1/2 Layer III. Typical settings: 44.1 kHz, 96–320 kbps, mono or stereo. VBR (variable bitrate) is widely supported; CBR (constant bitrate) offers predictable file size. Best when you need small files with broad device support.

M4A – container: MP4/M4A holding AAC (usually AAC-LC). AAC gives better perceived quality than MP3 at the same bitrate; recommended 96–192 kbps AAC. Note: .m4a files can also contain ALAC (Apple Lossless); if compatibility is uncertain, export as AAC-LC rather than ALAC.

WAV – typically linear PCM (uncompressed). Use 16-bit/44.1 kHz for standard clarity and smaller size compared with 24-bit. File-size formula: seconds × 44,100 × bits-per-sample × channels ÷ 8. Example: 30 s, stereo, 16-bit ≈ 5.3 MB.

Verify format and codec by inspecting file properties (Windows Properties → Details, macOS Get Info) or with MediaInfo. Extension can be misleading; run ffmpeg -i filename to display the actual codec if needed.

Convert or normalize with FFmpeg examples: MP3: ffmpeg -i input.wav -codec:a libmp3lame -b:a 192k -ar 44100 -ac 2 output.mp3; M4A (AAC-LC): ffmpeg -i input.wav -c:a aac -b:a 128k -ar 44100 -ac 2 output.m4a; WAV (16-bit PCM): ffmpeg -i input.mp3 -c:a pcm_s16le -ar 44100 -ac 2 output.wav.

After conversion, test playback on the target device and check metadata display; some players rely on specific tags or container formats for correct labeling and recognition.